Requires:
- Compressed Air Supply in accordance with ISO 8573-1, classes 2,4,3
- Compatible VFD
- ISO20 Toolholders
ATC Spindle 2.2kw 30,000RPM
$3,499.00
Description
Product Features:
- 2.2kw Spindle Power
- Automatic Tool Changer compatible with ISO20 Toolholders to ER11, ER16 and ER20
- Designed for radial and axial loads
- 2DB – Double ceramic angular contact bearings in both spindle nose and tail
- Max speed 30.000rpm
- Pressurized spindle to keep dust/chips out
- Balancing: executed according to ISO 1940: balancing grade 2.5 @ 30000rpm
- Tool Attached Sensor
- Tool Locked Sensor
- Temperature Thermistor
WARNING: Do not run the motor without a toolholder attached, it will cause bearing damage!
Additional information
| Weight | 10 kg |
|---|---|
| Dimensions | 60 × 20 × 20 cm |
Air Requirement
Supply the electrospindle with compressed air in accordance with ISO 8573-1, classes 2,4,3:
• class 2 for solid particles: solid particles size < 1μm
• class 4 for the humidity: dew point < 3°C (37.4°F)
• class 3 for the total oil: concentration of oil < 1mg/m3
Failure to comply with these specifications may result in product malfunction. The guarantee is not valid if pollutants are found during repair operations.
Warning
BG Precision does not and cannot know how end users will install their electrospindles. The installer or customer must therefore perform risk assessment specific to each installation and application.
The installation should only be carried out by a technician qualified to do so
USE THE ELECTROSPINDLE ONLY FOR THE PURPOSE FOR WHICH TEKNOMOTOR S.R.L. DESIGNED IT.
It is the purchaser responsibility to read, understand and comply to information presented in the usermanual
