Teknomotor wanted to offer a best in class product for the most demanding customers and we believe at BG Precision, Teknomotor is the highest quality CNC Spindle available on the market today.
Requires:
- Compatible VFD
- HSK32C Toolholders
Teknomotor QTC Spindle 2.2kw HSK32C
$3,499.00
Description
For years TeknoMotor has been selling high speed milling motors with a manual tool changing system, where the milling tool is placed directly into the ER collet in the spindle nose. This is a lowcost solution, and can work fine if you don’t have to do many toolchanges. Later Teknomotoe launched the ATC system, Automatic Tool Changer. The Automatic Toolchanger is a great system for industrial clients who use the machines for many hours a day, and really need the automatic tool change system. For many other clients it is too expensive. The motor itself is not such a high price, but you need many extra components like Pneumatics, and a Safety System, also the CNC controllers need to be programmed such that it can pick up and release tools in correct position. Due to all this extra cost and complexity, we see a market for a different kind of motor, which allows a quick tool change, but does not have to be automatic. Together with TeknoMotor this new motor has been developed. In the spindle nose it has a mechanical mechanism, that can pick up a HSK32-C toolholder. No air-pressure is required; this can be done with just an allen key (we advise to use a torque wrench and include it also with delivery).
Component features:
- Mechanical Tool Change Systems requires no air pressure, just an Allen key (size 2.5mm)
- Includes a Torque Wrench preset to correct torque for attaching the HSK32C Toolholders
- Quick Tool Changer compatible with HSK32C-Toolholders to ER16, ER20 and ER25
- Designed for radial and axial loads, heavy duty motor
- DB – Double angular contact bearing in spindle nose
- Three phase induction motor
- Squirel Caged rotor balanced to ISO 1940 norms
- Shaft driven cooling
- IP 54 compliant
- WARNING: Do not run the Motor without a toolholder attached, it will cause bearing damage!
- No Sensors or Saftety PLC required, since operator does toolchanging by hand, a check if tool is properly attached is done by the operator
Additional information
| Weight | 10 kg |
|---|---|
| Dimensions | 60 × 20 × 20 cm |
Warning
BG Precision does not and cannot know how end users will install their electrospindles. The installer or customer must therefore perform risk assessment specific to each installation and application.
The installation should only be carried out by a technician qualified to do so
USE THE ELECTROSPINDLE ONLY FOR THE PURPOSE FOR WHICH TEKNOMOTOR S.R.L. DESIGNED IT.
It is the purchaser responsibility to read, understand and comply to information presented in the usermanual
