- The ISO30 ER20 allows you to use ER20 Collets in your ISO30 Spindle. This can be advantageous for smaller tooling and you can save some money by purchasing smaller collets.These toolholders are designed for ISO30 ATC Spindles. The balancing of these toolholders is done to a very high grade, and that's why they can run up to 30,000RPM.We strongly recommend when working at high RPM you always verify the toolholder has 100% fit and the pull stud is 100% compatible with your spindle. Incorrect fit can cause major bearing damage and destroy the ATC Spindle.EXCLUDES: Spanner and Mounting device which can be ordered separately. Click link below to see:Mounting DeviceISO30 Collet SpannerOther ER collet sizes available as special order
- Out of stockThe ISO30 ER25 allows you to use ER20 Collets in your ISO30 Spindle. This can be advantageous for smaller tooling and you can save some money by purchasing smaller collets.These toolholders are designed for ISO30 ATC Spindles. The balancing of these toolholders is done to a very high grade, and that's why they can run up to 30,000RPM.We strongly recommend when working at high RPM you always verify the toolholder has 100% fit and the pull stud is 100% compatible with your spindle. Incorrect fit can cause major bearing damage and destroy the ATC Spindle.EXCLUDES: Spanner and Mounting device which can be ordered separately. Click link below to see:Mounting DeviceISO30 Collet SpannerOther ER collet sizes available as special order
- These toolholders are designed for ISO30 ATC Spindles. The balancing of these toolholders is done to a very high grade, and that's why they can run up to 30,000RPM.We strongly recommend when working at high RPM you always verify the toolholder has 100% fit and the pull stood is 100% compatible with your spindle. Incorrect fit can cause major bearing damage and destroy the ATC Spindle.EXCLUDES: Spanner and Mounting device which can be ordered separately. Click link below to see:Mounting DeviceISO30 Collet SpannerOther ER collet sizes available as special order
- These mounting devices are for use on our ISO30 toolholders. With a strong powder coated frame, they provide safe and secure tool holding while you set-up your cutting tool in the collet prior to loading in the ATC spindle. The locking rollers clamp the ISO toolholder in place without damaging the taper cone allowing you to tighten the collet nut safely. There is no better way to set up your ISO toolholders than with this ISO 30 Toolholder mounting device.ISO30 Toolholders Sold SEPARTELY
- For easy and safe clamping of tool shanks at the flange using rollers for mounting and removing cutting tools, therefore self clamping and ideal for HSK forms E and F as well as polygonal shanks. This model is for HSK32, wel also have models for other types. for all common tool shanks such as SK (DIN 69871), HSK (forms A, B, C, D, E, F), polygonal, MAS/BT (JIS B 6339) and CAT (ANSI B5.50)Component features:
- For easy and safe clamping of tool shanks at the flange using rollers for mounting and removing cutting tools, therefore self clamping and ideal for HSK forms E and F as well as polygonal shanks.
- Tool Diameter: 32mm
- Suitable for HSK 32 toolholders
- Suitable for C3 toolholders
- Suitable for any toolholder with outside diameter of 32mm
- The NBT30 60L toolholder give you an extra 10mm of reach vs a standard NBT30 toolholder. This is helps reduce long stick out on smaller tooling and can help you reach through your dust shoe.Dynamically balanced to 30,000RPM at G2.5 by Haimer balancing machine at all location for consistent balanceFEATURES:Toolholder NBT30 according to DIN69871 Precision class: AT3 Dynamic balancing: G2.5 (ISO1940) @ 30000rpm Includes pullstud (TeknoMotor/HSD/HQD compatible) Includes balanced ER32 collet nut Colletsize: ER32EXCLUDES: Spanner and Mounting device which can be ordered separatelyTool Holding Accessories - BG PrecisionOther ER collet sizes available as special orderNOTE: It is responsibility of operator to ensure toolholder and pull-stud compatibility with Spindle, Tool Carousel/Rack and CNC Machine
- Heavy duty plastic material
- Clear material provides much needed visibility
- Now 1250mm long to suit a wider range of dust collectors
- Suits DC-1200P, FM-300, JET-DC1200, CT-2042, DC-2300P and PM1900 as well as others
- This highly efficient filter is an excellent upgrade to to the 2.1kw 1800 CFM - Dust Extractor and 1.5kw 1200CFM - Dust CollectorPleated cartridge filters are far more efficient than even needlefelt filter bags, rated to 1 micron. It will also suit many other brands of 2HP dust extractors with a drum size of 480mm, and others with a small amount of modification. The unit is cleaned by rotating the handles several times, doing this rotates a rubber beater inside that removes settled dust from the pleats.Unit needs to be used with plastic collection bags in place of cloth bags, which are available in packs of ten in the relevant sizes for each machine.Pleated cartridges not only provide vastly enhanced micron filtration, the pleating also increases the surface area by up to 700%, which in turn also maintains a consistent CFM rate.
- These collets are high precision collets with a max run-out of 0.008mm. These collets are used for demanding CNC applications where minimal run-out is required.Component features:
- High Precision Quality
- Precision Ground to max. Run-Out 0.008mm
- These collets are high precision collets with a max run-out of 0.008mm. These collets are used for the demanding applications where minimal run-out is required.Component features:
- High Precision Quality
- Precision Ground to max. Run-Out 0.008mm
- These collets are high precision collets with a max run-out of 0.008mm. These collets are used for the demanding applications where minimal run-out is required.Component features:
- High Precision Quality
- Precision Ground to max. Run-Out 0.008mm
- These collets are high precision collets with a max run-out of 0.008mm. These collets are used for the demanding applications where minimal run-out is required.Component features:
- High Precision Quality
- Precision Ground to max. Run-Out 0.008mm
